#1 TWS WM11 UV 15 Litre AUSTRALIAN MADE

$168.85 inc GST

Product Description

TWS WM11 UV

A water based, fibre enhanced, hybrid polyurethane, TWS WM11 UV is ideally suited for pitched and flat roofs. With excellent UV resistance and anti-fungal properties, WM11 UV can be used to protect surfaces exposed to all types of weather conditions. WM11 UV can be left exposed or can be over coated with other water based paint or texture systems. WM11 UV provides a good film build, high elastometric properties and low dirt retention as well as excellent adhesion properties over building substrates including concrete, masonry, renders, cement sheeting and other common exterior substrates. Possesses excellent flexibility and elastic recover, good drying properties and low water absorption properties.

Drying Times:

  • Recoat – 2-4 hrs
  • Dry Film – 4-6 hrs

For all product inquiries please call our friendly staff on 1300 758 448.

  • Roofs
  • Parapets
  • Balconies or podiums under timber floor decking or paving systems
  • External surfaces exposed to constant weather

 

  • Outstanding weather resistant properties
  • Elastomeric and flexible
  • Excellent adhesion to surfaces
  • Once cured will not re-emulsify, handles permanently wet conditions
  • Resistant to fungi and algae
  • Low dirt retention
  • Low water absorption
  • Good film build
  • Light foot trafficable
  • Solvent free, non-hazardous

 

A minimum of 2 coats is recommended to be applied. For optimum performance on flat roofs a total minimum coverage of 2 litres/m2 is recommended. For non-critical areas, coverage of 1.5 litres/m2 can be considered. Pitched or vertical surfaces, coverage of 1 litre/m2 is recommend

Click on Below Links for Technical Data Sheets and/or MSDS Sheets

TWS – TDS WM11 UV

TWS – MSDS WM11 UV

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

0
Share
Total Waterproofing Supplies TWS EP25 KITTotal Waterproofing Supplies